MAIN CASE SEAL: Compression fit PVC junction reinforced with marine adhesive sealant. WIRE LEADS: 7 color-coded 12 AWG vinyl insulated stranded copper.
Each pump includes a set of sealant filled crimp connectors and heat shrink tubes for connecting pump leads to drop wire. INTAKE FILTER: Inlet port with 20 mesh stainless steel filter.
DISCHARGE FITTING: 3/4" Threaded X 1/2" Barbed Adapter fits 1/2 flexible pipe or tube. FLOJET pumps used in Nemo Submersibles feature industrial grade head/motor units with the following specifications: MOTOR: Low current draw permanent magnet, ball bearing drive, 2,000 hour brush life. PUMP HEAD: Positive displacement, duplex diaphragm design tolerates passage of small foreign particles and can be run dry without damage.
PERFORMANCE: Typically 1 to 2 GPM depending on lift height (head) and operating voltage. Maximum head is rated at 230 feet. POWER DRAW: Typically 50 watts - 100 watts depending on depth of lift. This item is in the category "Home & Garden\Home Improvement\Plumbing & Fixtures\Pumps & Water Filtration Systems\Pumps". The seller is "bgl44" and is located in this country: US.This item can be shipped worldwide.